General Information
- Built: September 2014
- IMO No.: 9648374
- Classification: DNV +1A1, Offshore Service Vessel, Supply, SPS, DYNPOS-AUTR, Fire Fighter I, Clean, SF, E0
Dimensions
- Length, overall: 97.29 metres
- Length, BP: 86.55 metres
- Breadth, moulded: 20.00 metres
- Depth, main deck: 9.00 metres
- Design draft: 6.40 metres @ 4500 DWT
- Maximum draft midship: 6.80 metres @ 5243 DWT
- GT: 5179 tonnes
- NT: 1554 tonnes
Capacities
- Deadweight (maximum): 5243 tonnes
- Clear Deck Area: 912 m2 (57m x 16m)
- Deck Strength: 10 t/m2 Aft of frame 30, 5 t/m2 Fwd of frame 30
- Deck Cargo: 2500 tonnes
- Ship Fuel: 494 m3
- Cargo Fuel: 855 m3
- Potable Water: 732 m3
- Ballast Water: 1143 m3
- Drill Water: 401 m3 Brine/DMA/Glycol/Liquid-1799 m3, Sg 2.5 t/m3 flash point above 60°C.
- Mud:NLS(Noxius Liquid Substances)
- Drilling Brine: 1062 m3
- Dry Bulk: 340.8 m3, Sg 2.6 t/m3 – 5 tanks
- Ship’s Stores: Freezer (-25°C.) – approximately 31 m3 Cold Room (+4°C.) – approximately 26 m3 Provisions store – approximately 52 m3 ~ 12°C
Machinery
- Main Engines: 4 x 1980 kW (4 x 2655 bhp = 10620 bhp) @ 720 rpm, MAN Diesel & Turbo 6L27/38 TIER II compliant
- Propulsion: 2 x 2500 kW Inovelis POD GE, Azimuth
- Bow Thrusters: 3 x 965 kW (3 x 1294 bhp) electric motor driven tunnel type, CPP, frequency controlled
- Emergency Generators:1x340kW @1800rpm/450V/3ph/60Hz (also harbour generator), TIER II complian
Deck Machinery
- Tuggers: Rolls Royce Brattvaag 2 x 10 t @ 0 – 20 m/min, capacity 240 m of 20 mm dia. wire each , electric drive
- Capstans: Rolls Royce Brattvaag 2 x 10 t @ 0 – 15 m/min, vertical type warping head, electric drive
- Windlass: Rolls Royce Brattvaag 2 x combined mooring winch/anchor
- windlasses Cable lifter, mooring drum and warping end electric drive Duty on cable lifter nominal 11.9 t @ 0 – 12 m/min, max pull
- 17.8 t Mooring drum, declutchable rope drum with band brake, dia.
- 530 mm, flange dia. 1360 mm, drum length 600 mm, stowing capacity 270 m of 52mm dia polypropylene 8 strand rope, duty on 1st layer 12 t @ 0 – 12 m/min, light line @ 0 – 40 m/min Fixed warping end on drum shaft, dia. 560 mm, length 500 mm, approximately 11 t pull
- Bow Mooring: See windlass. Roller type chain stopper with lashing arrangement for dia. 50 mm K3 chain cable.
- Smit Towing Bracket: 1 x 200 t
- Crane Capacity: Heila [email protected] 5 metres radius,knuckle boom crane
Electronics
- Main Radar: Furuno FAR-2837S-D ARPA Radar, S Band, 23.1″
- Auxiliary Radar: Furuno FAR-2817-D ARPA Radar, X Band, 23.1″
- Auto Pilot: Tokyo Keiki PR6344A-22
- Gyro Compass: 3 x Tokyo Keiki TG-8000/8500 Type S
- Magnetic Compass: Tokyo Keiki SH – 165 A1 Reflector Type
- Echo Sounder: Furuno FE-700, dual frequency 50Hz and 200Hz
- DGPS : Furuno GP-150
- Anemometer : 2 x Gill WindObserver 2
- Speed Log: Furuno Doppler Speed Log DS-80
