97 Meter Length Tug supply vessel

General Information

• Built: September 2014
• IMO No.: 9648386
• Classification: DNV +1A1 Fire fighter(I) Offshore service vessel
  (Supply) SPS Clean DYNPOS(AUTR) E0 SF

Dimensions

• Length, overall: 97.29 metres
• Length, BP: 86.55 metres
• Breadth, moulded: 20.00 metres
• Depth, main deck: 9.00 metres
• Design draft: 6.40 metres @ 4500 DWT
• Maximum draft midship: 6.80 metres @ 5248 DWT
• GT: 5179 tonnes
• NT: 1554 tonnes
• Length between P.P.: 86.55m
• Breadth: 20m
• Draft minimum: 4.6m
• Draft maximum: 6.8m (summer)

Capacities

• Deadweight (maximum): 5258 tonnes
• Clear Deck Area: 912 m2 (57m x 16m)
• Deck Strength: 10 t/m2 Aft of frame 30, 5 t/m2 Fwd of frame 30
• Deck Cargo: 2500 tonnes
• Ship Fuel: 494 m3
• Cargo Fuel: 824 m3
• Potable Water: 694 m3
• Ballast Water: 1143 m3
• Drill Water: 383 m3
  Brine/DMA/Glycol/Liquid-1799 m3, Sg 2.5 t/m3 flash point
  above 60°C.
• Mud: NLS(Noxius Liquid Substances)
• Drilling Brine: 1033 m3
• Dry Bulk: 340.8 m3, Sg 2.6 t/m3 – 5 tanks
• Ship’s Stores: Freezer (-25°C.) – approximately 31 m3
  Cold Room (+4°C.) – approximately 26 m3
  Provisions store – approximately 52 m3 ~ 12°C

Machinery

• Main Engines: 4 x 1980 kW (4 x 2655 bhp = 10620 bhp) @ 720 rpm,
  MAN Diesel & Turbo 6L27/38 TIER II compliant
• Propulsion: 2 x 2500 kW Inovelis POD GE, Azimuth

Deck Machinery

• Tuggers: Rolls Royce Brattvaag 2 x 10 t @ 0 – 20 m/min,
  capacity 240 m of 20 mm dia. wire each , electric drive
• Forward Tuggers : 2x110mx20mm
• Capstans: Rolls Royce Brattvaag 2 x 10 t @ 0 – 15 m/min,
  vertical type warping head,electric drive
• Windlass: Rolls Royce Brattvaag 2 x combined mooring
  winch/anchor windlasses Cable lifter,mooring drum and warping
  end electric drive Duty on cable lifter nominal 11.9 t @
  0 – 12 m/min, max pull 17.8 t Mooring drum, declutchable rope
  drum with band brake, dia. 530 mm, flange dia. 1360 mm, drum
  length 600 mm, stowing capacity 270 m of 52mm dia. polypropylene
  8 strand rope, duty on 1st layer 12 t @ 0 – 12 m/min, light line
  @ 0 – 40 m/min Fixed warping end on drum shaft, dia. 560 mm,
  length 500 mm, approximately 11 t pull
• Bow Mooring: See windlass. Roller type chain stopper with lashing
  arrangement for dia. 50 mm K3 chain cable.
• Smit Towing Bracket: 1 x 200 t
• Crane Capacity: Heila 1 x 5t @ 15 metres radius, knuckle boom crane

Electronics

• Main Radar: Furuno FAR-2837S ARPA Radar, S Band, 23.1″
• Auxiliary Radar: Furuno FAR-2117 ARPA Radar, X Band, 23.1″
• Auto Pilot: Tokyo Keiki PR6344A-22
• Gyro Compass: 3 x Tokyo Keiki TG-8000
• Magnetic Compass: Tokyo Keiki SH – 165 A1 Reflector Type
• Echo Sounder: Skipper GDS102, dual frequency 50Hz and 200Hz
• DGPS : Furuno GP-150
• Anemometer : Skipper GDS 102 Young
• Speed Log: Furuno Doppler Speed Log DS-80 RD20